Tables FR

Extrait du fichier (au format texte) :

COFFRAGE

PRODUCTIVITÉ

|

SÉCURITÉ

|

ROBUSTESSE

| GRANDES SURFACES

POUR LES GRANDES
SURFACES ET BALCONS

Tables de coffrage | Pour les grandes surfaces et balcons

2

COFFRAGE

Les tables de coffrage Alphi sont utilisées pour le coffrage de grandes surfaces ou de balcons. Elles s'adaptent à toutes les configurations de chantiers.
En fonction de l'usage et de la résistance attendus, elles seront associées aux étais acier conformes à la norme EN 1065 ou aux étais aluminium conformes à la norme EN 16031.
Très rigides et d'une grande stabilité, elles permettent de coffrer jusqu'à
6 m de profondeur.
Le système de protection collective AlphiSafe garantit en outre la sécurité des compagnons.

Chantier :
La Germandrée Logements
Client : Yilbat
Lieu : Narbonne
À gauche

Chantier en Suisse
Client : Induni
Lieu : Genève
À droite

3

Tables de coffrage | Pour les grandes surfaces et balcons

PRODUCTIVITÉ

Dans la boutique



TourA120 GB
TourA120 GB
13/07/2024 - www.alphi.fr
SHORING SAFETY | PERFORMANCE | ADAPTABILITY | COMPLIANCE THE SHORING TOWER WITH SAFETY FEATURES A120 tower | The shoring tower with safety features 2 SHORING Alphi shoring towers satisfy the needs of all types of projects: the A120 tower is an effective solution for user safety; low towers are available for specific requirements. As recommended in the CRAMIF NT24 guidelines, the A120 tower can be assembled and disassembled in complete safety, limiting the risks of falls from height. Site: La...

Etais EN
Etais EN
13/07/2024 - www.alphi.fr
PROPS SAFETY | COMPLIANCE | STRENGTH | QUALITY SECURE HOLD FOR FORMWORK AND DRYING SAFETY | COMPLIANCE | STRENGTH | European standard props are compliant with the EN 1065 and NF P 93-221 standards. Available in 4 classes. they offer the best performances in terms of strength and quality. QUALITY European standard props | A range of standardised metal props 4 PROPS The metal prop range offered by Alphi is used on all construction sites. Available in four classes. props compliant...

Paniers Det
Paniers Det
13/07/2024 - www.alphi.fr
ZUBEHÖR VORBEUGUNG | SICHERHEIT | EINFACHHEIT | ORDNUNG REIHE VON ZUBEHÖRTEILEN, DIE DIE HANDHABUNG UND LAGERUNG VON AUSRÜSTUNG BEI BAUPROJEKTEN VEREINFACHT SICHERHEIT | ORDNUNG | BENUTZERFREUNDLICHKEIT | ANSCHLAGPUNKTE Das TransÉtais-Transportgestell wurde eigens für den Transport von langen Stützen entwickelt. Es zeichnet sich durch eine konstruktionsbedingt sichere Handhabung aus, die zudem Erkrankungen des Bewegungsapparats vorbeugt. TransÉtais | Einfacher Transport...

Sabot De
Sabot De
13/07/2024 - www.alphi.fr
SCHALUNG LEISTUNG | EINFACHHEIT | QUALITÄT | ANPASSBARKEIT DIE UNVERZICHTBARE LASTABSTÜTZUNG Stützschuh für Schalungen | Die unverzichtbare Lastabstützung Der Stützschuh für Schalungen von Alphi ermöglicht eine Lastaufnahme von 20 kN. Er kann ganz einfach mittels einer Betonschraube an einer Wand, einer Gebäudestütze oder einem Gebäudeträger befestigt werden. Er wird zusammen mit einer einstellbaren Trägergabel mit einem Durchmesser von 48 mm eingesetzt. Der Stützschuh für...

DalpHi FR
DalpHi FR
13/07/2024 - www.alphi.fr
COFFRAGE ÉCONOMIE | ADAPTABILITÉ | LÉGÈRETÉ BV Cert. 6150814 LE COFFRAGE DE DALLES ALUMINIUM ÉCONOMIQUE DalpHi | Le coffrage de dalles aluminium économique 2 COFFRAGE Économique et performant, le système de coffrage plancher DalpHi est adapté à tous types de constructions : bureaux, logements, EHPAD, centres pénitentiaires & Sa mise en Suvre offre une productivité de 25 m2/homme/jour. Les pièces aluminium qui le composent en font l'un des systèmes de coffrage les plus...

Sabot Gb
Sabot Gb
13/07/2024 - www.alphi.fr
FORMWORK PERFORMANCE | SIMPLICITY | QUALITY | ADAPTABILITY ESSENTIAL LOAD SUPPORT Formwork support bracket | Essential load support The Alphi formwork support bracket has a load capacity of 20 kN. It can be mounted easily, on a skin, post or girder, using a concrete screw. It is used with a 48 mm diameter adjustable fork. Formwork support bracket in use 2 ACCESSORIES COMPONENT Formwork support bracket 100 mm mm Ø 57 Weight (kg) MWL (kN)

EscalibMDS FR
EscalibMDS FR
13/07/2024 - www.alphi.fr
SÉCURITÉ SÉCURITÉ | PRODUCTIVITÉ | SIMPLICITÉ | QUALITÉ ESCALIER DE CHANTIER EN COLIMAÇON À SORTIE LATÉRALE Escalib MDS | Escalier de chantier en colimaçon à sortie latérale 2 SÉCURITÉ L'Escalib MDS (Montage et Démontage en Sécurité) est un escalier en colimaçon métallique à sortie latérale. La marche triangulaire sert alors de palier. Il suffit d'orienter l'Escalib MDS par rotation d'un quart de tour pour que l'une des marches soit au même niveau que la dalle...

Etais DE
Etais DE
13/07/2024 - www.alphi.fr
STÜTZEN SICHERHEIT | KONFORMITÄT | ROBUSTHEIT | QUALITÄT SICHERER HALT BEI SCHALUNGSARBEITEN UND BEIM AUSHÄRTEN VON BETON SICHERHEIT | KONFORMITÄT | ROBUSTHEIT | QUALITÄT Die Euro-Schalungsstützen erfüllen die Normen EN 1065 und NF P 93-221. Sie sind in 4 Klassen erhältlich und bieten Höchstleistungen hinsichtlich Robustheit und Qualität. Euro-Schalungsstützen | Genormte Metallstützen 4 STÜTZEN Das Metallstützensortiment von Alphi wird auf Baustellen jeder...
 


22/10/2024 - www.nicoll.fr
Résumé en cours de création pour ce fichier PDF

Notice produit Ad?X, étanchéité complémentaire 100 % à froid pour toitures en pente
Notice produit Ad?X, étanchéité complémentaire 100 % à froid pour toitures en pente
28/06/2013 - www.siplast.fr
La couverture - Climat de montagne L étanchéité complémentaire Ad X Étanchéité complémentaire 100 % à froid pour toitures en pente Le procédé Ad X autorise, soit : * un abaissement de la pente minimale des couvertures * une longueur de rampant majorée * Description ½ Membrane de bitume élastomère SBS, à sous-face adhésive en plein protégée par un film siliconé. ½ Surface anti-glissante composée d un intissé de polypropylène gris. ½ Zone de recouvrement longitudinale adhésive. Domaine...

Dop Ati Mf01 0010818 Fr
Dop Ati Mf01 0010818 Fr
25/08/2024 - www.valtech-isolation.com
DoP Déclaration de performances N°ATI-MF01-001-0818 EN 13984:2013 MF 01 1. Code d'identification unique du produit type : ATI MF 01 2. Identification du produit de construction, conformément à l'article 11 § 4 du Règlement (UE) N° 305/2011 : ATI MF 01 Date de production : voir sur le produit ou sur son emballage. 3. Usage prévu du produit : Feuilles souples d'étanchéité. Feuilles plastiques et élastomères utilisées comme pare-vapeur. 4. Fabricant : nom, raison sociale ou marque...


CMF Plaquette SAV
CMF Plaquette SAV
16/08/2024 - www.cmf-groupe.com
Notre métier : votre sérénité M a i n te n a n c e e t e n t r e t i e n des structures et équipements Tél : 02 40 98 98 98 G R O U P E BÂTISSEUR DE CLIMATS ANTICIPER ET GÉRER la performance de vos installations Notre savoir-faire " Rénovation d'écrans " Régulation " Vitrage " Crémaillère " Moteur " Nettoyage toiture, démoussage " Irrigation " Chauffage " Entretien bâtiment : ossature, bardage, couverture " Maintenance de votre bâtiment et de vos équipements spécifiques Nos...


28/09/2024 - www.vescom.com
Résumé en cours de création pour ce fichier PDF