Affichage du fichier PDF http://www.holopro.com/uploads/media/Conditions_of_Sale_2006.pdf

Moteur de recherche Bâtiment PDF, Word, Ebooks - Documentation Bâtiment
Documentation Bâtiment Moteur de recherche Bâtiment PDF, Word, Ebooks - Documentation Bâtiment  
Que recherchez-vous ?      Chercher

  

Conditions of Sale 2006


Extrait du fichier http://www.holopro.com/uploads/media/Conditions_of_Sale_2006.pdf (au format texte) :
Conditions of Sale of G+B pronova GmbH
1. General 1.1 Sale and delivery, along with any other such legal transactions as may occur, shall take place solely under the conditions described below. Said conditions take precedence over, and absolve the vendor of any obligation in respect of, whatever conditions of purchase may apply on the side of the purchaser. These conditions of purchase shall not be binding upon the vendor even in the case where no additional and express repudiation of same shall have been made at the time of the closing of the contract. The purchaser shall count as having recognized the conditions described below, if at no earlier point, then certainly at the point of his acceptance of the vendor's goods. 1.2 Previously-made offers of delivery shall remain binding during a period of 6 calendar weeks, after which period they shall be considered as offers subject to confirmation. It may be the case that patent errors in the text of an offer will be subject to correction before the actual acceptance, by the vendor, of an order. 1.3 The vendor reserves the right, in the case where his suppliers shall for their part introduce improvements or model alterations in the products or services they provide, to deviate also for his part from the stipulations of already-existing sales documentation, tenders and order confirmations. 2. Prices Except where written agreement has been made to some other effect, the vendor's prices shall be understood to be strictly net, ex works. Packing and transport costs, as well as all other expenses and disbursements, as for example customs and excise duties, shall be borne by the purchaser. Except where some other agreement has been made, the prices and conditions applying shall be those in force on the day of the relevant delivery. All prices shall be understood to be exclusive of VAT. 3. Forms and Modes of Payment 3.1 The invoices of the vendor re delivery of goods are to be paid either within 8 days of the date on the invoice (in which case the payer shall be entitled to a 2% deduction) or within 30 days of same (in which case net). Invoiced assembly or installation services, however, are, given that they constitute simple services provided, to be paid for immediately and without deduction. 3.2 It shall be possible for the purchaser to enjoy a set-off on the claim of the vendor, or to exercise, in this regard, a right of retention, only in the case where the purchaser's counter-claim shall remain uncontested or shall be confirmed by way of a final decision by the courts 3.3 In the case where the invoices of the vendor shall remain unpaid beyond their due date, the vendor shall charge the purchaser, in addition, interest on arrears in the amount of 11 percentage points above the base interest rate of the European Central Bank. The vendor reserves the right to require payment for certain deliveries and services ­ as, for example, small-quantity deliveries, or repairs ­ immediately in cash, or by COD. 4. Reservation of Proprietary Rights 4.1 The vendor shall retain the ownership of the delivered good or goods up until the point at which all the vendor's legitimate claims vis-à-vis the purchaser (regardless of whether these apply at present or shall only come to apply in the future) shall have been met and fulfilled. 4.2 That purchaser who subjects the good or goods, once delivered, to processing shall not thereby acquire the right of exclusive ownership of the objects thus partially or entirely manufactured. The processing in question shall occur free of charge exclusively for the vendor, this latter and the purchaser being both agreed that, in the case where the reservation of proprietary rights shall for one reason or another be forfeited, the full ownership of the objects manufactured with the goods as delivered shall, together with the processing, pass over exclusively to the vendor, which latter shall accept this transfer of rights, the purchaser thereby remaining a non-remunerated depositary. In the case of processing carried out by means of goods or commodities still in the ownership of third parties, the vendor shall acquire a co-ownership of the new objects thus coming into existence. 4.3 The reselling, according to ordinary trade practices, of the good or goods in question shall be permissible, except where such permission shall be actually revoked by the vendor and provided that the purchaser is not in arrears as regards the obligations which he owes to the vendor. Should, however, the right of ownership enjoyed by the vendor cease, as a result of sale or combination, to obtain, then the position formerly occupied by the good itself shall come to be occupied by the claim, thereby arising, vis-à-vis the party having purchased said good from the purchaser, said claim being, already at this point, ceded and transferred from purchaser to vendor. Except in the case where this authorization shall be explicitly revoked by the vendor, the purchaser shall be authorized, provided only that he continue to meet his payment obligations vis-à-vis the vendor, to himself collect and take receipt of the financial claims which he shall have ceded and transferred, in principle, to the vendor; he shall not, however, enjoy right of disposal in other respects, over the monies so collected. Should payment cease, should insolvency procedures begin or application be made therefor, should there be initiated an act of protest or should there be issued an order for distraint, then the right of the purchaser to resale and to processing of the goods, as well as his right to the collection of accounts receivable shall all cease to obtain. Any accounts receivable the rights to which shall already have already conceded and which shall be paid at some point after the transpiring of any of the named events are to be collected and paid immediately into a special account. In the case where the party having purchased goods from the purchaser makes it a condition that the right to collect accounts receivable not be permitted to be reassigned, the purchaser shall be obliged to inform the vendor, immediately and without delay, about this. Except insofar as the purchaser shall be able, in such cases, to offer sufficient guarantees of some other sort for the security of the financial claims of the vendor, this latter shall have the right to forbid the resale of any goods provided by him to third parties who insist upon such conditions rendering impermissible the reassignment of the right to collect accounts receivable. 4.4 The purchaser shall be obliged to supply the vendor, whenever this latter shall request it, with information regarding the stock of goods in which title is retained and regarding the accounts receivable the right to which has been ceded. In the case of third parties' ­ in particular, of bailiffs' ­ taking measures to seize said goods in which title is retained or accounts receivable, the purchaser shall draw these parties' attention to the property and other rights in respect of same which are enjoyed by the vendor and shall also immediately inform this latter of these developments. Any costs, in particular those ensuing from the preservation of the rights of the vendor, and any losses or damages here shall be borne by the purchaser. 4.5 Any sort of mortgaging or pawning of the goods in which title is retained by the vendor, or any transfer of these latter to a third party by way of material security or deposit, is impermissible and shall result in the vendor's lodging claims for damages and compensation. 4.6 In the case of the purchaser's behaving in a manner contrary to the letter or spirit of the contract ­ and most particularly in the case of the purchaser's falling into arrears ­ the vendor shall have the right to openly inform the end-purchaser of the goods or services in question of the fact of the right to collection of accounts receivable's having been ceded, in the final analysis, to him, the vendor, and to proceed himself to effect such collection. He shall also have the right to regain, at the cost of the purchaser, possession of the goods in which title shall have been retained and to sell these goods himbeen retained and his collection of the accounts payable the rights to which shall have been conceded, however, shall not imply a withdrawal from the contract. 4.7 In the case where the value of the securities provided for the vendor exceeds, in total, this latter's financial claims by more than 20%, the vendor shall be obliged, should the purchaser request it, to consent to release. 5. Delivery The deliveries are to be made with the greatest speed and frequency as shall be possible in view of the stocks held by the vendor and of the production capacities of the latter's delivery plants. Excluded are any claims to compensation for damages, as well as any right to withdrawal from the contract or right of reduction, on the grounds of delayed deliveries where the action or inaction on the part of the vendor which shall have given rise to such delays shall have been action or inaction amounting to no more than mere negligence. 6. Shipment 6.1 In the matter of the transport of goods, the onus shall lie on the purchaser ­ that is to say, transport shall occur on his account and at his own risk. In the case of damage occurring during transport by rail, there will need to be provided: a consignment note officially stamped by the railway authorities; a report on the circumstances of the damage and a declaration of the transfer of rights and responsibilities; a solemn affirmation regarding the transport damages noted. In the case of damage occurring during transport by heavy goods vehicle: Written confirmation on the consignment note by the purchaser or receiver of the goods of the type and extent of the transport damage noted, this to be countersigned by the haulage contractor. 7. Delay in Acceptance 7.1 In the case where the purchaser shall fail to accept delivery of the goods ordered on the date of delivery as confirmed by the vendor, this latter shall have the right, without further announcement of this intent and without giving the purchaser notice of default, to warehouse the goods in question at the cost and on the account of the purchaser (said costs to include all additional costs connected therewith). 7.2 In the case where the purchaser shall be in default or delay as regards acceptance of goods and the ordered goods are entirely warehoused, these latter shall be invoiced to the purchaser; 90 % of the sum of said invoice shall be due for payment immediately. 7.3 In the case where the purchaser shall, by mutual agreement with the vendor, finally decide not to accept the ordered goods, the purchaser shall be charged, over and above the costs as stipulated in item 7.1 above, a further 20 % of the gross sum of the invoice as a lump-sum compensation for loss and damage. The onus shall lie on the purchaser to prove to the vendor that some lesser degree of loss or damage actually here applies 8. Guarantee and Liability 8.1 In the case where the object delivered is faulty or lacking in certain qualities which the purchaser was assured it would possess, or in the case where, due to manufacturing or material faults, it becomes defective during the period of guarantee, the vendor shall, as he sees fit, either provide a replacement of set the defects right. Several such settings-right shall be permissible. Moreover, the vendor shall not be liable for action or inaction amounting to no more than mere negligence 8.2 The period of guarantee shall run, except in the case of the sales of brand new goods to private customers ("consumers" in the meaning of § 13 of the German Civil Code) for 12 months, and shall begin from the date of the delivery. For the setting-right of defects, the defective goods should be delivered by the purchaser back to the vendor, usually to the place of business of this latter. In the case of such settings-right being carried out on the premises of the purchaser, the vendor shall invoice this latter for the journey involved therein. 8.3 The purchaser must, upon the delivery's arriving, immediately inspect this latter with a view to any transport damage that might obtain and, should there prove to be such, must immediately inform the vendor of any loss or damage by means of a constituent report of the haulage contractor or a solemn affirmation which shall have been signed by two witnesses and by the customer himself. Moreover, any obvious faults or defects must be communicated to the vendor in writing immediately, and at the very latest within three days of the date of delivery. The defective objects are to be kept and maintained in the condition in which they were in the moment in which they were discovered to be defective, so that they may be inspected by the vendor. Should the purchaser fail to fulfil any of the duties and obligations just listed, this shall mean that there shall no longer be any question of any claim vis-àvis the vendor with respect to the guarantee applying to the goods. 8.4 The stipulations outlined above shall not apply to used or second-hand goods, the delivery of which shall be in every case excluded from any and every sort of guarantee. This, however, shall not apply to sales to private customers. With these latter, separate agreements, different in each individual case, are to be arrived at. 8.5 Excluded are all other claims to compensation for loss or damage, except insofar as the damage concerned shall have arisen as a result of deliberate and wilful action or of gross negligence on the part of the vendor or of his accomplices. This exclusion shall not apply in the case of damage to life, limb or good health. 9. Venue For The Settlement of Disputes and Place of Fulfilment 9.1 The place of fulfilment for the deliveries of the vendor is the specific place of dispatch applying in each case 9.2 The place of fulfilment for payments is the head office of the vendor as this shall apply at any specific time (presently: Bergisch Gladbach) 9.3 It is agreed that the venue for the settlement of disputes for both parties shall be the magistrate's or district court situated, in each case, closest to the vendor's place of dispatch. 9.4 In the event of deliveries outside the Federal Republic of Germany, German law shall apply in addition to the terms and conditions agreed herein. 10. Further Agreements 10.1 All agreements between vendor and purchaser must be made in writing. No commercial agent or travelling salesman shall have the right to make agreements or to accept payments without the written consent thereto of the vendor. No verbal agreements have been reached. Should any individual provision of these conditions of sale be or become void, the validity of the remaining provisions shall remain unaffected. 10.2 As regards leased equipment, our separate leasing and rental conditions shall apply.

self to some other purchaser or purchasers. The purchaser authorizes, already with the acceptance of these conditions, the vendor to enter his places of business and/or private residence with the purpose of so regaining possession of the goods in question. The vendor's retaking of possession of the goods in which title shall have

The right is reserved to alter models, prices and possibilities of delivery. Bergisch Gladbach, September 2006


  Fiche société Accès au site  


Les fichiers PDF en rapport avec le site www.holopro.com...

Februar 2007
www.holopro.com
NEWSletter 2007 Februar 2007 · · HoloProTM auf der EuroCIS mit Komplettlösungen! Großer Erfolg für pronova Projektionssysteme auf der ISEurope 2007, Amsterdam HoloProTM auf der EuroCIS mit Komplettlösungen! HoloPresenterplus-Retail perfekt integrierbar! Gemeinsam mit unserem Schweizer Partner, dem führenden Anbieter für Digital Instore Merchandising Software, die visualFOOD® GmbH, zeigen wir den HoloPresenterplus - die Komplettlösung für den Einzelhandel! Durch sein ungewöhnliches Design und die
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FFebruar_2007.pdf
HoloPro and HoloSign Floating pictures and intense colours
www.holopro.com
Press Release HoloProTM and HoloSign ­ Floating pictures and intense colours! G+B pronova are presenting the latest version of the HoloProTM projection systems at PASSAGEN in Cologne (16 - 21 January 2007). Glass screens are transformed into projection areas with HoloProTM. Pictures from a video or data projector appear bright and brilliant ­ even in broad daylight! This patented technology from Cologne is used in buildings worldwide for info displays, in facades and museums and as digital signa
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FHoloPro_and_HoloSign_Floating_pictures_and_intense_colours.pdf
August 2005
www.holopro.com
NEWSletter 2005 August 2005 HoloSign erobert die Welt Lichtlenkung mit Hologrammen ...wussten Sie schon? HoloSign erobert die Welt! Der Regenbogen von HoloSign straht jetzt auch über Washington: In der Zentrale der Weltbank wurde eine sechs (!) Quadratmeter große Spiegel-HoloSign-Scheibe in einen Brunnen integriert. Das von vorne einfallende Licht wird durch den Spiegel reflektiert und läßt das Logo der Weltbank in blau erstrahlen. Durch Veränderung des Betrachterstandpunktes durchlaufen die Far
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FAugust_2005.pdf
projektionsgeometrien 01
www.holopro.com
HoloProTM Standardgeometrien für alle Scheibengrößen in der Übersicht 1/20 100" 84" 67" 60" 50" 40" 30" 20" 720,0 mm 1100,0 mm 1450,0 mm 1800,0 mm 2200,0 mm 2400,0 mm 3000,0 mm 3600,0 mm 100" 84" 67" 60" 50" 40" 2700,0 mm 2250,0 mm 30" 20" 1100,0 mm 830,0 mm 540,0 mm 1800,0 mm 1650,0 mm 1330,0 mm 720,0 mm 1100,0 mm 1450,0 mm 1800,0 mm 2200,0 mm 2400,0 mm 3000,0 mm 3600,0 mm 2/20 20" HoloProTM - Projektion von oben 1000-1200 ANSI Lumen und HoloPro - fähig! 720,0 mm 540,0 mm TM 20" HoloPro 1650,
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2Fprojektionsgeometrien_01.pdf
Holopresenter Mobil d 01
www.holopro.com
HoloPresenter Brillante Mobilität mobil Der HoloPresenter mobil: Elegantes Design in Glas und Edelstahl Höchste Brillanz durch hervorragenden Kontrast und hohe Leuchtkraft Mobiler Einsatz, zusammengeklappt und verstaut ein handlicher Koffer Einfach und minutenschnell einsetzbar, bei hellem Tageslicht, auch für Präsentationen im Freien Geringe Stellfläche Komplett mit Beamer Optional: Mini PC In Besprechungsräumen macht HoloProTM mächtig Eindruck. Und wer die Faszination mit zu seinen Kunden oder
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FHolopresenter_Mobil_d_01.pdf
HoloPro e 02
www.holopro.com
HoloProTM Living Transparency The transparency of the projection surfaces leads to creative solutions for information preparation: interactive elements with touch or gesture control broaden the scope of use. HoloProTM enables projection onto glass in daylight while maintaining transparency. This is made possible by the patented HoloProTM technology: holographic optical elements are beamed onto a highly transparent film by laser. This is then embedded in glass. The lightguiding effect enables rea
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FHoloPro_e_02.pdf
Conditions of Sale 2006
www.holopro.com
Conditions of Sale of G+B pronova GmbH 1. General 1.1 Sale and delivery, along with any other such legal transactions as may occur, shall take place solely under the conditions described below. Said conditions take precedence over, and absolve the vendor of any obligation in respect of, whatever conditions of purchase may apply on the side of the purchaser. These conditions of purchase shall not be binding upon the vendor even in the case where no additional and express repudiation of same shall
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2FConditions_of_Sale_2006.pdf
holosign d 02
www.holopro.com
HoloSign Lebendige Fassaden Lebendige Fassaden HoloSign ,,Eyefire" von Michael Bleyenberg bei der Deutschen Forschungsgemeinschaft in Bonn HoloSign bringt Fassaden zum Leuchten. HoloSign besteht aus Holographisch-Optischen Elementen, die weißes Licht in seine spektralen Bestandteile zerlegen und gezielt zum Betrachter hin umlenken. Leuchtende Bilder und farbenprächtige Gestaltungen erscheinen auf der Fassade. Das in der HoloSign-Scheibe hinterlegte Motiv erstrahlt durch eine homogene Lichtquelle
http%3A%2F%2Fwww.holopro.com%2Fuploads%2Fmedia%2Fholosign_d_02.pdf

les produits dans la boutique
BRILLIANT  - Plafonnier Movie LED 2x5W GU10 chrome - G08913_15

BRILLIANT

BRILLIANT  - Plafonnier Movie LED 2x5W GU10 chrome - G08913_15

74.46 €


 
Vis à tête hexagonale partiellement filetées<br />DIN 931, acier 8.8

OTMT

Vis à tête hexagonale partiellement filetées<br />DIN 931, acier 8.8

9.33 €


 
Vis à tête fraisée à six pans creux entièrement filetées<br />DIN 7991, acier 10.9

OTMT

Vis à tête fraisée à six pans creux entièrement filetées<br />DIN 7991, acier 10.9

14.20 €


 
Forets, série extra-courte, queue cylindrique, carbure micrograin, DIN 6539

FANOCARB

Forets, série extra-courte, queue cylindrique, carbure micrograin, DIN 6539

11.06 €


 
WINEO - Lame à clipser 800 XLLund Dusty Oak - DLC00065

WINEO

WINEO - Lame à clipser 800 XLLund Dusty Oak - DLC00065

96.08 €


 
JETLY - Pompe de massage Booster Delfino 0,75CV monophasée - 113070

JETLY

JETLY - Pompe de massage Booster Delfino 0,75CV monophasée - 113070

367.5 €


 
Barreaux calibrés pour clavettes DIN 6880

OTMT

Barreaux calibrés pour clavettes DIN 6880

101.10 €


 
Plaquettes de rechange pour fraise.

HOLTZLING

Plaquettes de rechange pour fraise.

4.20 €


 
Alésoirs machine, queue cylindrique, hélice à gauche, coupe à droite, HSS-E, similaires à DIN 212

ASTRA

Alésoirs machine, queue cylindrique, hélice à gauche, coupe à droite, HSS-E, similaires à DIN 212

26.59 €


 
SFERACO - Robinet à tournant sphérique 3 pièces acier ASTM A216 femelle/femelle BSP Ø11/2 - 796008

SFERACO

SFERACO - Robinet à tournant sphérique 3 pièces acier ASTM A216 femelle/femelle BSP Ø11/2 - 796008

128.35 €


 
Mèches à mortaiser

T&O

Mèches à mortaiser

13.20 €


 
Chaîne et poteau métal de signalisation

VISO

Chaîne et poteau métal de signalisation

82.65 €


 


Les fichiers PDF à découvrir...

  • Self-POLYVISION
    www.hmi-thirode.com
    http://www.hmi-thirode.com/fichiers/docs/Self-POLYVISION.pdf
  • Documentation Softline - Veka
    www.veka.fr
    Un battement réduit pour un clair de jour maximal 2 De nombreuses combinaisons esthétiques intérieures 1 " Ouvrant et dormant 70 mm à 5 chambres d isolation en PVC résistant aux chocs et conforme à la marque NF EN 12608 2 " Parfaite étanchéité grâce à un joint de butée périphérique dans le dormant et l ouvrant 3 " Poignée centrée et battement réduit pour un clair de jour maximal 1 Vos désirs sont couleurs et design... 70 mm VEKA, la caution d une grande marque Quelques exemples parmi près de
    http://www.veka.fr/fileadmin/page-uploads/veka-sas/produits/documents/SOFTLINE70_DOC.pdf
  • EFIAS sunlux
    www.sunlux.fr
    Fiche Produit 00148 - Document non contractuel Eclairage commercial > Eclairage accentuation EFIAS Asymmetrical fixed recessed spot for Ip 20 Classe I 850°C IK 07 metal halide lamp Body in lacquered steel Internal reflector in facetted satinfinish aluminium Lamp offset to provide asymmetrical lighting Protective glass (anti-UV glass on option) Lamp raised to limit glare Power supply 230 V - 50 Hz via class 2 or electronic gear tray Spot encastré fixe asymétrique pour lampe iodures métalliques Co
    http://www.sunlux.fr/upload/catalogue_pdf/id/EFIAS-sunlux.pdf
  • Discovery
    www.3einternational.com
    Discovery IP 68 IK 10 (30 Joules) Classe I Classe III (12 V) Les projecteurs encastrés Discovery permettent la mise en valeur des monuments et de la végétation. Applications Voir pages 14-15 Lampes Fluo-compacte jusqu'à 15 W Halogène jusqu'à 50 W LED jusqu'à 7 W Catalogue Éclairage Technique 2010/12 216 Discovery COMPOSANTS Éclairage par projection 2 1 Corps et couvercle inférieur en aluminium moulé. Finition par poudrage polyester thermolaqué, noir texturé ou gris RAL 9006 mat. Fixation par vi
    http://www.3einternational.com/fiche-produit/items/discovery.html?file=tl_files/indal-france/Produits/Discovery.pdf
  • 053 0062 Monte matériaux 26 VH-HK
    www.loxam.fr
    MONTE-MATERIAUX TELESCOPIQUE SUR REMORQUE 26 VH/HK 2100 Ce modèle est présenté à titre indicatif comme un exemple de matériel référencé dans cette catégorie. Il ne présage pas du matériel proposé dans l agence que vous aurez sélectionnée. 3373 3012 1700 7730 3873 MONTE-MATERIAUX TELESCOPIQUE SUR REMORQUE 26 VH/HK 30 m 28 Code produit 053 0062 Déploiement de l échelle de 6,60 m à 26 m Charge utile maximale 250 kg 24 Angle d inclinaison 0° à 85° 22 Puissance moteur 9,6 kW 20
    http://www.loxam.fr/files/fiches_caracteristiques/0530062.pdf
  • BRIO 400F A
    kaufelfr.tnb.com
    AMBIANCE NON PERMANENT BRIO 400F A Code : 236 413 CARACTERISTIQUES TECHNIQUES N° d'homologation : Indice de protection : Flux assigné: Autonomie : Classe : Dimensions : Tension d'alimentation : Consommation : T04078 IP 42 / IK 07 380 lm 1 heure II 345 x 155 x 65 mm (Lxlxh) 230 V / 50 Hz 12.5 mA Performance SATI Esthétique & Ergonomie Consommation en veille réduit de plus de 60% Composant lumineux haute fiabilité : 2 leds-témoin à la place d'une ampoule incand. Qualité Fluo avec garantie 3 ans -
    http://kaufelfr.tnb.com/kaufel/BRIO_400F_A.pdf
  • Notice de montage meuble standard (PDF 70 ko)
    www.ambiancebain.com
    NOTICE DE MONTAGE N°1 POUR MEUBLE STANDARD Recommandation importante : votre salle de bains doit être installée dans une pièce ventilée et à l'écart de toutes projections d'eau, sous risque de non garantie. Inspecter chaque meuble avant l'installation. Aucune réclamation ne sera prise en compte après l'installation de la salle de bains. Les hauteurs mentionnées sont à titre indicatif. Nous prendrons comme exemple de montage une composition suivant le schéma A, mais cette méthode est à employer p
    http://www.ambiancebain.com/fileadmin/user_upload/fr/documents/documents_meubles_salles_de_bains/notice_montage_1_meuble-standard.pdf
  • Les 1ers volets de désenfumage marqués CE de RF-T sont disponibles sur le marché français
    www.andresudrie.com
    InformatIon presse - févrIer 2013 Protection incendie et désenfumage : nouvelles normes européennes applicables dès le 1er février 2013 Les premiers volets de désenfumage marqués CE sont déjà disponibles sur le marché français et sont produits par Rf-Technologies Enjeu majeur pour la protection incendie, les solutions de désenfumage sont soumises à une réglementation stricte. De nouvelles normes européennes sont applicables dès le 1er février 2013. A partir de cette date, seuls les volets de dés
    http://www.andresudrie.com/wp-content/uploads/2013/02/RF-T-Volets-CE-et-NF-1er-fevrier.pdf
 

  Accueil  -   Soumettre un fichier  -   La boutique  -   Infos légales  -   A propos de Documentation-batiment
Documentation Bâtiment copyright @ BL-Dev 2018 - Un site du Réseau Bâtiment